Engineering Tools
Filters
- Bahco (3)
- BlueSpot Tools (9)
- BOA (4)
- Dormer (8)
- Expert (2)
- Facom (3)
- Faithfull (45)
- Halls (1)
- IRWIN® (2)
- Maun (3)
- Miscellaneous (1)
- Moore & Wright (11)
- Priory (14)
- Q.Max (4)
- Recoil (16)
- RIDGID (1)
- Roughneck (2)
- Silver Steel (2)
- STANLEY® (5)
- Starrett (10)
- Teng (2)
- Trend (2)
- Wiha (1)
- E-Magnets (0)
- Vaughan (0)
- 0.001in (1)
- 0.0015in (1)
- 0.002in (1)
- 0.004in (1)
- 0.005in (1)
- 0.010in (1)
- 0.012in (1)
- 0.020in (1)
- 0.030in (1)
- 1/32in (2)
- 1/18in (1)
- 1/16in (4)
- 3/32in (6)
- 1/8in (5)
- 5/32in (5)
- 3/16in (6)
- 7/32in (2)
- 1/4in (4)
- 3/8in (2)
- 1/2in (2)
- 3/4in (2)
- 1 1/8in (1)
- 1/8in x 13in (1)
- 1/4in x 13in (1)
- 1/2in x 13in (1)
- 0.03mm (1)
- 0.03-0.5mm (1)
- 0.04-5mm (1)
- 0.05mm (1)
- 0.05-1mm (1)
- 0.06mm (1)
- 0.10mm (1)
- 0.15mm (1)
- 0.20mm (1)
- 0.50mm (1)
- 2mm (3)
- 3mm (3)
- 4mm (3)
- 5mm (3)
- 6mm (3)
- 8mm (3)
- 10mm (4)
- 12mm (3)
- 14mm (2)
- 16mm (3)
- 19mm (1)
- 75mm (2)
- 1/4 - 20 tpi (2)
- 1/4 - 28 tpi (1)
- 5/16 - 24 tpi (1)
- 3/8 - 16 tpi (2)
- 3/8 - 24 tpi (2)
- 1/2 - 12 tpi (1)
- 1/2 - 20 tpi (1)
- 10 - 32 tpi (1)
- 0.030in/0.0005in (1)
- 0.8mm/0.01mm (1)
- 1.1/16in (1)
- 1.1/2in (1)
- 1.1/4in (1)
- 1.1/8in (29mm) (1)
- 1.3/16in (1)
- 1.3/4in (2)
- 1.5/8in (1)
- 1.5mm (1/16in) (4)
- 1/2 - 13 TPI 10 Inserts (1)
- 1/2in (13mm) (1)
- 1/4in (6mm) (1)
- 12.0mm 1/2in (2)
- 2.5mm (3/32in) (6)
- 2mm (5/64in) (2)
- 3.0mm 1/8in (2)
- 3.2mm (1/8in) (2)
- 3mm (1/8in) (5)
- 4.0mm 5/32in (2)
- 44mm (1.3/4in) (2)
- 4mm (5/32in) (8)
- 5.0mm 3/16in (2)
- 5mm (3/16in) (6)
- 6.0mm 1/4in (1)
- 6mm (1/4in) (5)
- 8.0mm 5/16in (2)
- 8mm (5/16in) (3)
- M3 x 0.5 (2)
- M4 - M10 (2)
- M4 x 0.7 (2)
- M5 (2)
- M5 x 0.8 (2)
- M6 (2)
- M6 x 1.0 (2)
- M8 (2)
- M8 x 1.25 (2)
- M10 x 1.50 (2)
- M12 x 1.75 (2)
- Metric (3)
- Metric/Imperial (1)
- Set 8 (2)
- Set of 4 (2)
- 1in (0)
- 1/4 - 20 TPI 15 Inserts (0)
Square Head Centre Punch
Faithfull Centre Punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully ha...
View full detailsSteel Straight Edge
Maun all-purpose Steel Straight Edge for marking lines on wallpaper, floor coverings and leather. Crafted from high-quality carbon steel for durabi...
View full detailsCSM Precision Rule
The Moore & Wright CSM Precision Rules are fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of...
View full detailsEASYSCRIBE Scribing Tool
The Trend EASYSCRIBE is a handheld scribing tool for architrave, skirting, scribing doors, scribing worktops, setting hinge recess depth, etc. Fit...
View full detailsS579 Telescopic Gauge Set
Handles are rigidly attached to the contact plungers and are automatically self-centering. Constant spring tension provides uniform contact pressur...
View full details827 Series Edge Finder
Workpieces with straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines can all be quickly and accurately located with t...
View full details667M Series Feeler Strip
Widely used in automotive, aviation, diesel and farm equipment manufacture and also in jig, fixture and gauge work. Packed individually in envelope...
View full details667 Series Feeler Strip
Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work....
View full details565 Series Parallel Pin Punches
A well proportioned pin punch, hardened and tempered with knurled finger grip.
248A Series Long Pin Punches
Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3.1/2in) long and the diameters of the punches ar...
View full detailsMetric Feeler Gauge Set
Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins ...
View full details161A Series Toolmaker's Clamp
Designed for maximum strength and rigidity, this clamp is hardened and extremely useful for holding work together in tapping, drilling and various ...
View full details117 Series Centre Punch
Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished...
View full detailsDynaGrip™ Nail Punch
The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long leng...
View full detailsInner-Outer Reamer
The RIDGID Inner-Outer Reamers have a hardened steel construction and are suitable for cutting copper and stainless steel tubing. They have 46 cutt...
View full detailsMetric Coarse Taps
A Recoil Tap is used when an existing thread has been damaged or stripped. The tap will form a thread slightly oversize the specified thread size.
Sparkplug Thread Repair Kit
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in orig...
View full detailsMedium Thread Repair Kit
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in orig...
View full detailsCoarse Thread Repair Kit
Recoil Inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials, in origi...
View full detailsUNF Insert Kits
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in orig...
View full details