Files & Rasps
Filters
- 5/32in (1)
- 3/16in (1)
- 7/32in (1)
- 160mm Bastard Cut (1)
- 100mm (4in) (2)
- 150mm (6in) (6)
- 200mm (8in) (6)
- 250mm (10in) (5)
- 300mm (12in) (4)
- Bastard Cut, 200mm (8in) (1)
- Metal & Plastic 250mm (10in) (1)
- Second Cut, 200mm (8in) (1)
- 4.0mm (0)
- 4.8mm (0)
- 5.5mm (0)
- 150mm x 1/8in (0)
- 200mm x 5/32in (0)
- 200mm x 3/16in (0)
- 200mm x 7/32in (0)
- 140mm Bastard Cut (0)
- 160mm Dead Smooth Cut (0)
- 140mm Smooth Cut (0)
- 160mm Smooth Cut (0)
- 125mm (5in) (0)
- 175mm (7in) (0)
- 200mm (8in) One Round Edge (0)
- 200mm (8in) Two Round Edges (0)
- 200mm x 4mm (8in x 5/32in) (0)
- 200mm x 5.5mm (8in x 7/32 in) (0)
- 250mm (10in) One Round Edge (0)
- 250mm (10in) Two Round Edges (0)
- 350mm (14in) (0)
- Bastard Cut 200mm (8in) (0)
- Bastard Cut, 150mm (6in) (0)
- Bastard Cut, 250mm (10in) (0)
- Fine Cut 140mm (5.1/2in) (0)
- Fine Cut 250mm (10in) (0)
- Half Round 250mm (10in) (0)
- Round 250mm (10in) (0)
- Second Cut, 150mm (6in) (0)
- Shaver Tool Blade 60mm (2.1/2in) (0)
- Standard 250mm (10in) (0)
Surform® Replacement Blade
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.
Flat File
Roughneck Flat File for general purpose work, manufactured from heat treated carbon steel. Double cut on both sides with two sets of opposing teeth...
View full detailsSlim Taper Saw Files
A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.
Round Second Cut Files Unhandled
For filing circular openings or concave surfaces, slightly tapered towards point.
Hand Smooth Cut File, Unhandled
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.
Hand Second Cut File, Unhandled
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edges permits work in corners.
Half-Round Smooth Cut Files, Unhandled
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.
Half-Round Second Cut Files, Unhandled
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.
Half-Round Bastard Cut Files, Unhandled
Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: approx. 62 t...
View full detailsHand Bastard File, Unhandled
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners. Smooth Cut:...
View full detailsFlat Smooth Cut Files Unhandled
For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.
Flat Second Cut Files Unhandled
For general work on iron and steel slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.
Flat Bastard Cut Files Unhandled
For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Smooth Cut: a...
View full detailsRound Chainsaw Files
Single cut teeth for sharpening round-hooded chain saw teeth. Safe point and efficient tooth design.
Square Smooth File Unhandled
Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapere...
View full detailsSquare Bastard File Unhandled
Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapere...
View full detailsHand Needle File, Unhandled
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, pre...
View full detailsHand Bastard Cut File, Unhandled
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-all...
View full detailsFlat Second Cut File Unhandled
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more...
View full detailsERGO™ Round File, Handled
Bahco ERGO™ Handled Round File for filing holes, large fillets and concave surfaces. Fitted with a two-component handle for maximum comfort and an ...
View full details1-210-08-1-2 ERGO™ Half-Round File, Handled
Bahco ERGO™ Handled Half-Round File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum ...
View full detailsNeedle File Set 10pce - 10pce
10pceIncludes half-round with tapered end, round, crossing, barrette, three square, square with tapered end, flat warding file, 2 x tapered flat fi...
View full detailsHalf Round File - 2nd Cut 250mm
2nd Cut 250mm250mm engineers half-round file. Second cut. Case hardened steel. Soft-grip handle with hanging hole.
Flat File - 2nd Cut 250mm
2nd Cut 250mm250mm engineers flat file. Second cut. Case hardened steel. Soft-grip handle with hanging hole.