Files & Rasps
Filters
- 5/32in (1)
- 4.0mm (1)
- 4.8mm (1)
- 5.5mm (1)
- 150mm x 1/8in (1)
- 200mm x 5/32in (1)
- 200mm x 3/16in (1)
- 200mm x 7/32in (1)
- 140mm Bastard Cut (4)
- 160mm Bastard Cut (3)
- 160mm Dead Smooth Cut (3)
- 140mm Smooth Cut (4)
- 160mm Smooth Cut (4)
- 100mm (4in) (23)
- 125mm (5in) (2)
- 150mm (6in) (33)
- 175mm (7in) (1)
- 200mm (8in) (35)
- 200mm (8in) Two Round Edges (1)
- 200mm x 4mm (8in x 5/32in) (1)
- 200mm x 5.5mm (8in x 7/32 in) (1)
- 250mm (10in) (28)
- 250mm (10in) One Round Edge (1)
- 250mm (10in) Two Round Edges (1)
- 300mm (12in) (23)
- 350mm (14in) (3)
- Bastard Cut 200mm (8in) (1)
- Bastard Cut, 150mm (6in) (1)
- Bastard Cut, 200mm (8in) (2)
- Bastard Cut, 250mm (10in) (1)
- Fine Cut 140mm (5.1/2in) (1)
- Fine Cut 250mm (10in) (1)
- Half Round 250mm (10in) (1)
- Metal & Plastic 250mm (10in) (1)
- Round 250mm (10in) (1)
- Second Cut, 150mm (6in) (1)
- Second Cut, 200mm (8in) (3)
- Shaver Tool Blade 60mm (2.1/2in) (1)
- Standard 250mm (10in) (1)
- 3/16in (0)
- 7/32in (0)
- 200mm (8in) One Round Edge (0)
Half-Round Second Cut File, Handled
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being round...
View full detailsSurform® Replacement Blade
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.
Slim Taper Saw Files
A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.
Taper Saw Files
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.
Square Smooth Cut Files Unhandled
For filing slots, keyways and surface filing. Slightly tapered towards point.Double cut teeth.
Square Bastard Cut Files Unhandled
For filing slots, keyways and surface filing. Slightly tapered towards point. Double cut teeth. Bastard Cut: approx. 26 teeth per 25mm (Coarse).
Round Second Cut Files Unhandled
For filing circular openings or concave surfaces, slightly tapered towards point.
Round Bastard Files Unhandled
For filing circular openings or concave surfaces. Slightly tapered towards point. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx....
View full detailsHand Smooth Cut File, Unhandled
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.
Hand Second Cut File, Unhandled
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edges permits work in corners.
Half-Round Smooth Cut Files, Unhandled
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.
Half-Round Second Cut Files, Unhandled
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.
Half-Round Bastard Cut Files, Unhandled
Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: approx. 62 t...
View full detailsHand Bastard File, Unhandled
Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners. Smooth Cut:...
View full detailsFlat Smooth Cut Files Unhandled
For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.
Flat Second Cut Files Unhandled
For general work on iron and steel slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.
Flat Bastard Cut Files Unhandled
For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Smooth Cut: a...
View full detailsRound Chainsaw Files
Single cut teeth for sharpening round-hooded chain saw teeth. Safe point and efficient tooth design.
Flat Wood Rasp
The Faithfull flat wood rasp is for use on wood or soft metals, for professional or frequent DIY use. This range of rasps has coarse bastard teeth ...
View full detailsThree-Square Second Cut File, Handled
The Faithfull Three-Square Second Cut Engineers File (sometimes described as a triangular file) has three flat sides and is used to file in acute i...
View full detailsRound Second Cut File, Handled
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, wit...
View full detailsChainsaw File
Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted wi...
View full detailsFC Diamond Chainsaw Files
Used correctly, this diamond chainsaw file will last a long time and increase the life of a chainsaw blade. Often only one or two light strokes are...
View full detailsWarding Smooth Cut File, Unhandled
A small rectangular slender file with edges tapered to a point.Both faces double cut for locksmithing and other precision work.