Skip to content

Router Bits

Filters

£
£
Sold out
Trend

Radius Cutter

£47.95 - £90.65
£47.95 - £90.65
£47.95
£41.38 - £81.51
£41.38 - £81.51
£41.38
Out of stock

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products suc...

View full details
£47.95 - £90.65
£47.95 - £90.65
£47.95
£41.38 - £81.51
£41.38 - £81.51
£41.38
Sold out
Save up to 14% Save % (£6.26)
Trend

45° Chamfer V-Groove Cutter

£41.88 - £44.71
£41.88 - £44.71
£41.88
£37.15 - £38.45
£37.15 - £38.45
£37.15
Out of stock

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on...

View full details
£41.88 - £44.71
£41.88 - £44.71
£41.88
£37.15 - £38.45
£37.15 - £38.45
£37.15
Save up to 14% Save % (£6.26)
Sold out
Trend

Universal Sub Base C/w Pins & Bush

£38.15
£38.15 - £38.15
£38.15
£31.54
£31.54 - £31.54
£31.54
Out of stock

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.Line...

View full details
£38.15
£38.15 - £38.15
£38.15
£31.54
£31.54 - £31.54
£31.54
Sold out
Sold out
Trend

TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm

£67.18
£67.18 - £67.18
£67.18
£59.12
£59.12 - £59.12
£59.12
Out of stock

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping’s and plastic laminate ed...

View full details
£67.18
£67.18 - £67.18
£67.18
£59.12
£59.12 - £59.12
£59.12
Sold out
Sold out
Trend

1/2in Router Cutter Set, 6 Piece

£43.79
£43.79 - £43.79
£43.79
£38.04
£38.04 - £38.04
£38.04
Out of stock

This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chip...

View full details
£43.79
£43.79 - £43.79
£43.79
£38.04
£38.04 - £38.04
£38.04
Sold out
Sold out
Trend

S3/21 x 1/4 Solid Two Flute Cutter 6.3 x 28mm

£68.91
£68.91 - £68.91
£68.91
£60.26
£60.26 - £60.26
£60.26
Out of stock

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest du...

View full details
£68.91
£68.91 - £68.91
£68.91
£60.26
£60.26 - £60.26
£60.26
Sold out
Sold out
Trend

RT/11M x 1/2 TC Straight Blade Rota-Tip 12.7mm x 89mm

£100.37
£100.37 - £100.37
£100.37
£89.83
£89.83 - £89.83
£89.83
Out of stock

The Trend Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of tung...

View full details
£100.37
£100.37 - £100.37
£100.37
£89.83
£89.83 - £89.83
£89.83
Sold out
Sold out
Trend

RB/B Replacement Blade

£18.57
£18.57 - £18.57
£18.57
£15.16
£15.16 - £15.16
£15.16
Out of stock

The Trend RB/B is a spare Replacment solid carbide Rota-Tip Blade to suit Rota Tip Cutters. Specifications: Length. 49.5mm.Width. 12mm.Thickness:...

View full details
£18.57
£18.57 - £18.57
£18.57
£15.16
£15.16 - £15.16
£15.16
Sold out
Sold out
Trend

RB/A Replacement Blades (Pack 10)

£113.20
£113.20 - £113.20
£113.20
£101.72
£101.72 - £101.72
£101.72
Out of stock

The Trend RB/A/10 Replacement Blades are high quality solid carbide replacement cutters for Trend RT/04, RT/05, RT/06, RT/07, RT/08, RT/10, RT11, R...

View full details
£113.20
£113.20 - £113.20
£113.20
£101.72
£101.72 - £101.72
£101.72
Sold out
Sold out
Trend

PSS8X1/4TC TCT Router Cutter Set, 12 Piece

£77.04
£77.04 - £77.04
£77.04
£65.17
£65.17 - £65.17
£65.17
Out of stock

Trend PSS8X1/4TC TCT Router Cutter Set supplied in a plastic carry case. Contains: 2 x Straight Cutters Ø: 1/4in & 1/2in. 1 x Dovetail 104°...

View full details
£77.04
£77.04 - £77.04
£77.04
£65.17
£65.17 - £65.17
£65.17
Sold out
Sold out
Trend

3-in-1 Pocket Hole Jig

£95.11
£95.11 - £95.11
£95.11
£85.59
£85.59 - £85.59
£85.59
Out of stock

Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for...

View full details
£95.11
£95.11 - £95.11
£95.11
£85.59
£85.59 - £85.59
£85.59
Sold out
Sold out
Trend

MS/PRO Multiscribe Profile Matching Tool

£66.07
£66.07 - £66.07
£66.07
£58.09
£58.09 - £58.09
£58.09
Out of stock

The Trend MS/PRO Multiscribe Profile Matching Tool scribes internal and external curves, marks parallel lines with fast, easy adjustable backset to...

View full details
£66.07
£66.07 - £66.07
£66.07
£58.09
£58.09 - £58.09
£58.09
Sold out
Sold out
Trend

Lock Jig for Router

£134.18
£134.18 - £134.18
£134.18
£121.07
£121.07 - £121.07
£121.07
Out of stock

The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortice and dead locks with up t...

View full details
£134.18
£134.18 - £134.18
£134.18
£121.07
£121.07 - £121.07
£121.07
Sold out
Sold out
Trend

LOC/BLK/PK1 Loc Block Workpiece Support

£38.14
£38.14 - £38.14
£38.14
£33.32
£33.32 - £33.32
£33.32
Out of stock

The Trend Loc Block consists of four interlocking gripping blocks that lock together to allow the workpiece to be held in place when sanding, drill...

View full details
£38.14
£38.14 - £38.14
£38.14
£33.32
£33.32 - £33.32
£33.32
Sold out
Sold out
Trend

GB5 Sub Base C/W Bush & 2 Pins

£51.64
£51.64 - £51.64
£51.64
£45.11
£45.11 - £45.11
£45.11
Out of stock

Round sub base can be used as a guide itself.Supplied with:-10 mm guide bush, 1/4in and 1/2in shank line up pin and bush and fixing screws.Will fit...

View full details
£51.64
£51.64 - £51.64
£51.64
£45.11
£45.11 - £45.11
£45.11
Sold out
Sold out
Trend

GAUGE/1 Depth Gauge

£21.23
£21.23 - £21.23
£21.23
£17.61
£17.61 - £17.61
£17.61
Out of stock

The Trend Gauge/1 is a metal rule Depth Gauge to accurately set the height of router cutters and saw blades. It will measure both horizontal and ve...

View full details
£21.23
£21.23 - £21.23
£21.23
£17.61
£17.61 - £17.61
£17.61
Sold out
Sold out
Trend

Draining Groove Jig DG/JIG

£185.65
£185.65 - £185.65
£185.65
£162.54
£162.54 - £162.54
£162.54
Out of stock

The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machin...

View full details
£185.65
£185.65 - £185.65
£185.65
£162.54
£162.54 - £162.54
£162.54
Sold out
Sold out
Trend

CraftPro Folding Sharpening Stone

£34.57
£34.57 - £34.57
£34.57
£30.28
£30.28 - £30.28
£30.28
Out of stock

The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which...

View full details
£34.57
£34.57 - £34.57
£34.57
£30.28
£30.28 - £30.28
£30.28
Sold out
Sold out
Trend

CB38-532 TCT CB Counterbore

£57.25
£57.25 - £57.25
£57.25
£49.78
£49.78 - £49.78
£49.78
Out of stock

The Trend CB Counterbore is extensively used for recessing bolt and screw heads and is supplied with a HSS slow spiral drill bit. Fully adjustable,...

View full details
£57.25
£57.25 - £57.25
£57.25
£49.78
£49.78 - £49.78
£49.78
Sold out
Sold out
Trend

CASE/1001 Combi 1001 Carry Case

£56.13
£56.13 - £56.13
£56.13
£48.92
£48.92 - £48.92
£48.92
Out of stock

Hard-wearing carry case for protecting and carrying the Trend COMBI1001, COMBI1002, KWJ700 and KWJ900.

£56.13
£56.13 - £56.13
£56.13
£48.92
£48.92 - £48.92
£48.92
Sold out
Sold out
Trend

Anglefix Mitre Guide

£19.11 - £19.11
£19.11
£37.42
£37.42 - £37.42
£37.42
Out of stock

The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is take...

View full details
£19.11 - £19.11
£19.11
£37.42
£37.42 - £37.42
£37.42
Sold out
Sold out
Trend

7/01 x 1/4 TCT Ovolo & Round Over 2.5mm Radius

£40.58
£40.58 - £40.58
£40.58
£35.38
£35.38 - £35.38
£35.38
Out of stock

Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards...

View full details
£40.58
£40.58 - £40.58
£40.58
£35.38
£35.38 - £35.38
£35.38
Sold out
Sold out
Trend

62/10 x 1/4 TCT Drill / Countersink / Counterbore

£80.48
£80.48 - £80.48
£80.48
£70.69
£70.69 - £70.69
£70.69
Out of stock

These combination tools in TCT can be used in abrasive materials.They will drill, countersink and finally counterbore a parallel hole.Designed to r...

View full details
£80.48
£80.48 - £80.48
£80.48
£70.69
£70.69 - £70.69
£70.69
Sold out
Sold out
Trend

6200/8 TCT Countersink Set

£45.86
£45.86 - £45.86
£45.86
£38.41
£38.41 - £38.41
£38.41
Out of stock

These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key.Choose TCT for abrasive materials. T...

View full details
£45.86
£45.86 - £45.86
£45.86
£38.41
£38.41 - £38.41
£38.41
Sold out
Fast Shipping

Via Approved Couriers

Need help?

We are a Click Away

Product Info

Contact us for Help

UK Distribution

Dispatched in 24 Hours

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare