Router Bits
Filters
- 1/2in x 1/4 bore (1)
- 1/4in shank (2)
- 1/4in Shank (1)
- 1/2in shank (2)
- 1/2in Shank (1)
- 3.0mm (1)
- 10.0mm (1)
- 12mm (1)
- 12.7mm (1)
- 13.3mm (1)
- 16mm (1)
- 16.5mm (1)
- 18mm (1)
- 3.0mm x 15mm (1)
- 3.2 x 11mm (1)
- 6.0 x 16mm (2)
- 6.3mm x 16mm (2)
- 10.0mm x 19mm (2)
- 10.0 x 19mm (1)
- 10.0 x 19.1mm (1)
- 10 x 24mm (1)
- 10 x 25mm (1)
- 10.0mm x 35mm (1)
- 11.0mm x 25mm (1)
- 12.0mm x 19mm (2)
- 12 x 19mm (1)
- 12.0 x 19.0mm (1)
- 12.0 x 19mm (1)
- 12.0 x 19.1mm (1)
- 12 x 63mm (1)
- 12.7 x 9.5mm (1)
- 12.7mm x 9.5mm (1)
- 12.7 x 19mm (1)
- 12.7mm x 19mm (1)
- 12.7 x 25mm (1)
- 12.7mm x 25mm (1)
- 12.7 x 25.4mm (3)
- 12.7 x 31.8mm (1)
- 12.7mm x 32mm (1)
- 12.7 x 38.1mm (1)
- 12.7 x 50.0mm (1)
- 12.7mm x 50mm (1)
- 12.7 x 63mm (1)
- 12.7mm x 63mm (1)
- 15 x 24mm (1)
- 15.0mm x 25mm (2)
- 15 x 25mm (1)
- 15.0 x 25.4mm (1)
- 15.9mm x 19mm (1)
- 15.9 x 19.1mm (1)
- 15.9 x 25mm (1)
- 15.9mm x 50mm (1)
- 16.0mm x 19mm (1)
- 18.0mm x 25mm (1)
- 18.2mm x 21mm (1)
- 19.0mm x 25mm (1)
- 19.1mm x 25mm (1)
- 19.1 x 25.4mm (2)
- 19.1 x 50mm (1)
- 20.0mm x 25mm (2)
- 22.0mm x 19mm (2)
- 25.0mm x 25mm (1)
- 25.4mm x 19mm (1)
- 25.4mm x 25mm (1)
- 12.7 x 50.0mm, especially suited for drilling (1)
- 3.2 Radius (1)
- 1/2in 12.7mm Radius (1)
- 1/2in 16mm Radius (1)
- 1/2in 19.1mm Radius (1)
- 1/2in 6.3mm Radius (1)
- 1/2in 9.5mm Radius (1)
- 1/2in Shank 12.7 x 25mm (1)
- 1/2in Shank 12.7 x 50mm (1)
- 1/2in Shank 18.2 x 50mm (1)
- 1/2in Shank 31.8 x 12mm (1)
- 1/2in Shank 35.1 x 12mm (1)
- 1/2in shank 45° 9.2 x 19.1mm (1)
- 1/2in Shank 51.5 x 19mm (1)
- 1/2in Shank, 12.7 x 25.4mm (1)
- 1/4in 1.6mm Radius (1)
- 1/4in 12.7mm Radius (1)
- 1/4in 3.2mm Radius (1)
- 1/4in 3mm Radius (1)
- 1/4in 4.8mm Radius (1)
- 1/4in 6.3mm Radius (1)
- 1/4in 9.5mm Radius (1)
- 1/4in Shank 12.7 x 25mm (1)
- 1/4in Shank 31.8 x 12mm (1)
- 1/4in shank 45° 9.2 x 19.1mm (1)
- 1/4in Shank 6.3 x 12.7mm (1)
- 1/4in Shank 6.3 x 25.4mm (1)
- 1/4in shank 60° 10.3 x 12.7mm (1)
- 1/4in Shank 9.5 x 12.7mm (1)
- 104°, 12.7 x 12.7mm (1)
- 12 x 63mm, Overall Length: 115mm (1)
- 12.70mm (1/2in) (1)
- 13 x 19 x 10 x 6mm (1)
- 12.7 x 50mm (0)
- 25.0 x 25mm (0)
- 103°, 13.2 x 13.0mm (0)
Kitchen Worktop Jigs
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including...
View full detailsVJS/CG/36 Clamp Guide 36in
The Guide Clamp features integral clamping jaws and a locking lever that provides quick way of clamping the guide batten. It is ideal for holding a...
View full detailsVari Jig Angle Guide VJSAG36
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle r...
View full detailsAluminium Wide Track Cutting Guide 900mm (36in)
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortle...
View full detailsTwo Flute Cutter, Extra Long Shank
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They h...
View full detailsPocket Hole Jigs
The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes ...
View full detailsKitchen Worktop Jigs
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including...
View full detailsGuide Bush
Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.
Bearing Guided Intumescent Strip Cutter
Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescen...
View full detailsCraftPro Two Flute Cutters, 1/2in Shank
Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based material...
View full detailsBiscuit Jointer Set, Craft Pro
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of bi...
View full detailsBearing Guided Corner Bead, 1/4in Shank
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90°. With two ...
View full detailsBearing Guided Template Profile Cutter
Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute c...
View full details90° Bearing Guided Trimmer Cutter
Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in sta...
View full detailsCraftPro Round Over Two Flute Cutter, 1/4in Shank
The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curv...
View full detailsCraftPro Two Flute Cutters, 1/4in Shank
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based mate...
View full detailsReplacement Bearings
Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed fo...
View full details9/7 Bearing Guided Corner Bead Cutter
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used t...
View full detailsPin Guided Rounding Over Cutter
Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre board...
View full detailsCollet Sleeves
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correc...
View full detailsCountersinks
Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep grou...
View full details90° Shank Mounted Template Profiler
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cu...
View full details90° Bearing Guided Triple Flute Cutter
Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.