Trend

The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable...

This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chip...

These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tool...

These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce v...

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 ...

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slig...

This Trend 337 x 1/2 tc is a one-piece tongue and groove set. The parts are inter-changed on the Arbor to alter the set up. It has a maximum timber...

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to pr...

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on...

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is s...

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut.This set is...

This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming...

Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in sta...

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cu...

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop pr...

The Trend AIR STEALTH Half Mask has a low-profile ergonomic design that offers less breathing resistance. Manufactured from high-grade materials, o...

Pair of P3(R) filters for AIR STEALTH half mask with Twin HEPAC* pleat encapsulated design filter provides 99.99% filtration of airborne particles ...

Pair of P3(R) Nuisance Odour Filters for AIR STEALTH half mask. The Twin HEPAC* pleat encapsulated design provides 99.99% filtration of airborne pa...

Trend AirPro Max Ear Defenders for use with the Airshield Pro (AIR/PRO) and AirPro Max (AIR/PRO/M) powered respirators. The easy clip-on adaptor sy...

The Trend AirPro Max THP3 Filter provides respiratory protection to BS EN 12941:1999. Covers all types of dust generated when working in hard and s...

The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when m...

The Trend CraftPro Bearing Guided 3° Undercut Router Bit has a shank-mounted bearing guide for routing a leading edge on doors to allow a tight fit...