wago

Orange coloured end and intermediate plateDimension width is 0.8mm x height is 61.5mm x depth from upper-edge of DIN-rail 33mmWeight is 1.5gProcess...

Orange coloured end and intermediate plate for 3-conductor terminal blocksDimension width is 0.8mm x height is 72.2mm x depth from upper-edge of DI...

The 2050-1291 from WAGO is a 1.1mm thick end and intermediate plate designed for the 2250-120x terminal block series.Dimensions (WxHxD): 1.1x32.6x2...

The 249-117 from Wago is a 10mm wide, grey colour screwless end stop for use with terminal blocks.Dimension is 10mm x 28.2mm x 45mm (W x H x D)TS 3...

Dimensions: 88x37.7x1mmFor Use With: Wago TOPJOB S 2110-120x and 2110-520x Series DIN Rail Terminal BlocksAccessory Type: End and Intermediate Plat...

The 2116-1292 is an End and intermediate plate; 1 mm thickDIN 35 rail-mounted terminal block with LEVER & PUSH-IN CAGE CLAMP® technologySignifi...

Orange coloured end and intermediate plateDimension width is 1mm x height is 74.8mm x depth from upper-edge of DIN-rail 32.9mmWeight is 2.4gThickne...

Orange coloured end and intermediate plate for 3-conductor terminal blocksDimension width is 1mm x height is 90.8mm x depth from upper-edge of DIN-...

The 2116-1392 is an End and intermediate plate; 1 mm thickDIN 35 rail-mounted terminal block with LEVER & PUSH-IN CAGE CLAMP® technologySignifi...

2-conductor through terminal block with lever. Certified by UL 60079, EN 60079-0 , CNCA-C23-01, TP TC 012/2011, EN 60947, C22.2, EN 60947, IEC 6094...

2-conductor ground terminal block with lever and push-button. Certified by UL 60079, EN 60079-0, CNCA-C23-01, TP TC 012/2011, IEC 60079-0, IEC 6007...

The 2116-1207 is a 2-conductor ground terminal block; with lever and Push-in CAGE CLAMP®; 16 mm²; with test port; side and center marking; for DIN-...

The 2116-5207 is a 2-conductor ground terminal block; with lever and push-button; 16 mm²; with test port; side and center marking; for DIN-rail 35 ...

DIN 35 rail-mounted terminal block with PUSH-BUTTON CAGE CLAMP® technologySignificant cost savings through the reduction of panel space & faste...

The 2204-1207 is a 2-conductor ground terminal block; with push-button; 4 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35...

DIN 35 rail-mounted terminal block with PUSH-BUTTON CAGE CLAMP® technologySignificant cost savings through the reduction of panel space & faste...

DIN 35 rail-mounted terminal block with PUSH-BUTTON CAGE CLAMP® technologySignificant cost savings through the reduction of panel space & faste...

The 2116-1204 is a 2-conductor through terminal block; with lever and Push-in CAGE CLAMP®; 16 mm²; with test port; side and center marking; for DIN...

The 2116-1201 is a 2-conductor through terminal block; with lever and Push-in CAGE CLAMP®; 16 mm²; with test port; side and center marking; for DIN...

DIN 35 rail-mounted terminal block with PUSH-BUTTON CAGE CLAMP® technologySignificant cost savings through the reduction of panel space & faste...

2-conductor through terminal block with lever. Certified by UL 60079, EN 60079-0, CNCA-C23-01, TP TC 012/2011, IEC 60079-0, IEC 60079, EN 60947, C2...

The 2116-5204 is a 2-conductor through terminal block; with lever and push-button; 16 mm²; with test port; side and center marking; for DIN-rail 35...

DIN 35 rail-mounted terminal block with PUSH-IN CAGE CLAMP® technologySignificant cost savings through the reduction of panel space & faster in...

DIN 35 rail-mounted terminal block with PUSH-IN CAGE CLAMP® technologySignificant cost savings through the reduction of panel space & faster in...